Professional Industrial 3D LiDAR Scanning, Point Cloud Surveys and Mechanical Engineering Services in Chatswood, NSW
Hamilton By Design provides professional industrial 3D LiDAR scanning, 3D laser scanning and mechanical engineering services in Chatswood, Artarmon, St Leonards, North Sydney and surrounding areas of Sydney’s Lower North Shore.
Using advanced terrestrial laser scanning technology, we capture detailed three-dimensional measurements of existing buildings, mechanical equipment, structural steelwork, pipework, plantrooms and industrial infrastructure.
Our services support engineers, architects, manufacturers, building services contractors, facility managers and construction companies requiring reliable dimensional information for design, fabrication, refurbishment and equipment installation.
Whether your project involves an existing mechanical plantroom, commercial building upgrade, industrial machinery installation or structural modification, Hamilton By Design can provide the 3D scanning data, engineering models and technical drawings required to support your project.
Industrial 3D LiDAR Scanning Services in Chatswood
Industrial facilities and commercial buildings often contain complex arrangements of mechanical equipment, pipework, structural steelwork and building services. Obtaining accurate measurements of these environments can be challenging, particularly where access is restricted or existing drawings are unavailable.
Hamilton By Design uses terrestrial 3D LiDAR scanning to capture existing site geometry and produce registered point clouds suitable for engineering and design applications.
Unlike conventional measurement methods, LiDAR scanning captures millions of three-dimensional measurement points, creating a detailed digital representation of the scanned environment.
Our industrial scanning services include:
- Industrial 3D LiDAR scanning and point cloud surveys
- Mechanical plantroom and HVAC equipment scanning
- Structural steelwork and building infrastructure measurement
- Pipework routing and mechanical services coordination
- Scan-to-CAD modelling and reverse engineering
- Machinery installation and equipment replacement surveys
- Factory, workshop and equipment layout documentation
- As-built drawings and existing-condition verification
- Engineering design and fabrication support
- Building refurbishment and mechanical services upgrades
- Installation clearance and interference assessments
- Existing equipment and structural interface documentation
The resulting point cloud can be used to develop 3D CAD models, engineering drawings, installation layouts and fabrication documentation.
Mechanical Plantroom and Building Services Scanning
Commercial buildings throughout Chatswood and Sydney’s Lower North Shore frequently contain complex mechanical services installations, including chilled-water systems, ventilation equipment, pumps, pipework, valves and associated structural supports.
These installations may have undergone numerous modifications over their operating life, leaving existing drawings incomplete or inconsistent with actual site conditions.
Hamilton By Design provides 3D LiDAR scanning services to capture the existing arrangement of mechanical plantrooms and building services infrastructure.
Typical applications include:
- HVAC plantroom upgrades and modifications
- Chilled-water and condenser-water pipework
- Pump and mechanical equipment replacement
- Mechanical ventilation system upgrades
- Pipework routing and equipment connection planning
- Existing equipment support arrangements
- Plantroom access and maintenance clearance assessments
- Building services coordination and clash identification
The captured point cloud provides engineers and contractors with a three-dimensional reference for planning modifications and developing installation documentation.
By understanding existing site geometry before fabrication or construction begins, project teams can reduce the likelihood of dimensional conflicts, unexpected site modifications and installation delays.
3D Scanning for Industrial Equipment Installation
Installing new machinery or replacing existing equipment often requires accurate dimensional information about surrounding structures, mechanical services and available installation clearances.
Traditional measurement methods can be time-consuming and may overlook important geometric relationships between equipment, structures and services.
Hamilton By Design provides industrial 3D scanning services to support machinery installation, equipment relocation and modifications to existing industrial facilities.
Our scanning methodology can capture:
- Existing machinery and equipment envelopes
- Structural beams, columns and cross-members
- Floor levels and equipment foundations
- Pipework and mechanical service connections
- Equipment access and maintenance clearances
- Existing platforms, walkways and support structures
- Potential installation obstructions
- Building and structural interfaces
The resulting data can be imported into engineering software to develop proposed equipment layouts, assess installation clearances and identify potential clashes.
Where required, Hamilton By Design can also develop mechanical engineering models and general arrangement drawings to support equipment installation and fabrication.
This approach is particularly valuable for projects where existing drawings are outdated, incomplete or unavailable.
Structural Steelwork and Fabrication Surveys
Structural steelwork modifications frequently require reliable measurements of existing beams, columns, connections and surrounding equipment.
This is particularly important when new steelwork must connect to existing structures or when fabricated components must be installed within restricted spaces.
Hamilton By Design provides 3D laser scanning services for structural steelwork documentation and fabrication planning.
Typical applications include:
- Structural steel modifications and extensions
- Existing beam and column surveys
- Equipment support frames
- Access platforms and industrial walkways
- Structural connection and interface measurements
- Machinery support structures
- Fabrication fit-up verification
- Crane and lifting equipment installation planning
- Structural clearance and interference assessments
The captured point cloud can be used to develop CAD models, general arrangement drawings and fabrication documentation.
For projects involving existing steelwork, the scanning process can help establish the relative positions of structural members and identify geometric variations that may influence the proposed design.
Engineering assessments, structural verification and detailed connection design can be undertaken separately where required by the project scope.
Pipework Scanning, Routing and Mechanical Services Coordination
Existing pipework installations can be difficult to document using conventional measurement methods, particularly in congested plantrooms, industrial facilities and operating process environments.
Hamilton By Design provides 3D LiDAR scanning and mechanical engineering services to support pipework modifications, replacement projects and new installations.
Our services can assist with:
- Existing pipework route documentation
- Pipework replacement and rerouting
- Pump and equipment connection modifications
- Pipe support and structural interface identification
- Pipework clearance assessments
- Mechanical services coordination
- Development of proposed 3D pipework models
- General arrangement and fabrication drawings
Using the registered point cloud as a dimensional reference, proposed pipework routes can be developed within a 3D CAD environment.
This allows engineers and contractors to consider existing equipment, structural obstructions, access requirements and available installation space before fabrication begins.
Where required, Hamilton By Design can provide a combined service covering site scanning, mechanical engineering design, 3D modelling and preparation of engineering drawings.
Scan-to-CAD Modelling and Mechanical Engineering
Hamilton By Design provides more than point cloud data.
As a mechanical engineering consultancy, we can use captured 3D scanning information to develop CAD models and engineering documentation suitable for design, manufacturing and installation.
Our scan-to-CAD services include:
- SolidWorks 3D mechanical modelling
- Reverse engineering of existing components
- Existing equipment and machinery models
- Structural steelwork geometry
- Pipework and mechanical services models
- Equipment installation layouts
- General arrangement drawings
- Fabrication and manufacturing drawings
- Engineering design modifications
- Simplified building and structural geometry
Depending on the project requirements, deliverables may include:
| Deliverable | Typical Application |
|---|---|
| Registered E57 point cloud | Existing-condition documentation and data exchange |
| Autodesk ReCap RCP/RCS | CAD and design coordination |
| LAS point cloud | Point cloud exchange and processing |
| SolidWorks models | Mechanical engineering and design |
| STEP and Parasolid files | CAD model exchange |
| General arrangement drawings | Equipment layout and installation planning |
| Fabrication drawings | Manufacturing and construction |
| Simplified BIM geometry | Building and multidisciplinary coordination |
The level of modelling detail is agreed upon before work begins to ensure the final deliverables are appropriate for the intended engineering application.
Industrial 3D LiDAR Scanning Equipment
Hamilton By Design uses a FARO Focus S70 terrestrial laser scanner for industrial and building-scale scanning projects.
The scanner is suitable for capturing complex environments, including mechanical plantrooms, industrial equipment installations, structural steelwork and building services infrastructure.
The FARO Focus S70 provides detailed three-dimensional measurements and is particularly useful for documenting existing environments where conventional measurement methods would be inefficient.
For smaller components requiring higher-detail measurement, Hamilton By Design also has access to a Revopoint MetroY Ultra handheld blue-laser scanner.
The selection of scanning equipment depends on the project requirements, including:
- Size and complexity of the equipment or structure
- Required measurement accuracy
- Available site access
- Surface characteristics
- Line-of-sight limitations
- Intended engineering application
- Required final deliverables
Scanning accuracy and deliverable tolerances are assessed according to the equipment used, site conditions, registration methodology and intended use of the captured information.
Our Industrial 3D Scanning Process
Hamilton By Design follows a structured scanning and engineering workflow to ensure the captured information is appropriate for the intended project.
Step 1 – Project Review and Scope Definition
We review the proposed project, available drawings, site access, required accuracy and final deliverables.
This allows us to identify the scanning methodology, equipment requirements and expected level of engineering documentation.
Step 2 – On-Site 3D LiDAR Scanning
Our scanner is positioned at selected locations to capture the required equipment, structures and surrounding geometry.
Scanning positions are selected to manage line-of-sight limitations and minimise areas of missing data.
Where required, additional scanning positions are used to improve coverage of complex mechanical installations.
Step 3 – Point Cloud Registration and Processing
Individual scans are aligned and registered to produce a combined three-dimensional point cloud.
The registered data is reviewed for alignment, coverage and suitability for the agreed deliverables.
Step 4 – Engineering Modelling and Documentation
Where required, the point cloud is used to develop mechanical engineering models, equipment layouts, structural geometry and engineering drawings.
The modelling process is undertaken according to the agreed scope and intended application.
Step 5 – Digital Project Delivery
Final deliverables are supplied in agreed file formats suitable for the client’s engineering, design or construction workflow.
These may include registered point clouds, CAD models, general arrangement drawings and fabrication documentation.
Benefits of Industrial LiDAR Scanning
Industrial 3D LiDAR scanning offers significant advantages when documenting existing facilities and planning engineering modifications.
Improved dimensional information
A registered point cloud provides a detailed three-dimensional record of visible site geometry, reducing reliance on isolated manual measurements.
Reduced site measurement requirements
A comprehensive scanning survey can reduce the need for repeated site visits to obtain additional dimensions.
Better installation planning
Existing equipment, structural elements and services can be reviewed within a 3D environment before proposed modifications are undertaken.
Reduced fabrication uncertainty
Accurate existing-condition information helps identify potential dimensional conflicts before components are manufactured.
Improved engineering coordination
Point clouds and CAD models can be shared between mechanical engineers, structural engineers, architects, contractors and fabrication teams.
Digital documentation of existing facilities
The captured information provides a useful reference for future maintenance, refurbishment, equipment replacement and facility modifications.
Industrial and Commercial Applications in Chatswood
Chatswood and the surrounding Lower North Shore contain a diverse range of commercial buildings, mechanical services installations, workshops and infrastructure.
Hamilton By Design supports projects involving:
- Commercial office buildings
- Mechanical plantrooms
- HVAC and ventilation systems
- Industrial workshops and manufacturing facilities
- Building refurbishment and fit-out projects
- Equipment installation and replacement
- Structural steelwork modifications
- Pumping and mechanical services infrastructure
- Warehousing and material handling equipment
- Building maintenance and asset upgrades
Our scanning services are particularly useful for projects involving existing infrastructure where accurate site measurements are required before engineering design or fabrication can proceed.
Areas We Service Around Chatswood
Hamilton By Design provides industrial 3D LiDAR scanning and mechanical engineering services throughout Chatswood and surrounding Sydney locations.
Our service areas include:
- Chatswood
- Chatswood West
- Artarmon
- Willoughby
- Lane Cove
- St Leonards
- Crows Nest
- North Sydney
- Macquarie Park
- Ryde
- Roseville
- Lindfield
- Gordon
- Northbridge
- Frenchs Forest
- Brookvale
We also undertake industrial 3D scanning projects throughout Greater Sydney, the Central Coast, Newcastle, the Hunter Valley and other Australian locations.
Why Choose Hamilton By Design for Industrial LiDAR Scanning?
Hamilton By Design combines practical mechanical engineering experience with advanced 3D scanning technology.
Our approach considers not only the geometry being captured but also how that information will be used for engineering design, fabrication, installation and verification.
Our capabilities include:
- Professional mechanical engineering services
- Industrial 3D LiDAR scanning
- SolidWorks 3D CAD modelling
- Mechanical equipment design
- Reverse engineering
- Structural and mechanical equipment documentation
- Industrial fabrication support
- Pipework and mechanical services modelling
- Engineering drawings and installation layouts
This combination allows us to assist clients from initial site measurement through to the development of engineering models and drawings.
Rather than treating scanning as an isolated surveying activity, we focus on providing useful engineering information that supports practical project outcomes.
Frequently Asked Questions
What is industrial LiDAR scanning?
Industrial LiDAR scanning uses laser measurement technology to capture three-dimensional coordinates of existing equipment, structures and facilities.
The captured measurements form a point cloud that can be used for engineering design, equipment installation, fabrication planning and existing-condition documentation.
Can you scan an operating mechanical plantroom?
Yes. Industrial LiDAR scanning can often be undertaken in operating facilities, subject to site access, safety requirements and visibility.
Some projects may benefit from scanning during planned shutdowns or periods of reduced activity.
Can you create SolidWorks models from the point cloud?
Yes. Hamilton By Design can develop SolidWorks models and engineering drawings using registered point cloud data as a dimensional reference.
The level of detail depends on the project requirements and intended use of the model.
Can 3D scanning help with equipment installation?
Yes. Existing-condition scanning helps identify structural interfaces, installation clearances, pipework locations and potential conflicts before equipment is fabricated or installed.
Can you provide fabrication drawings?
Yes. Hamilton By Design can develop fabrication drawings and general arrangement drawings from engineering models where this work is included in the project scope.
How accurate is industrial LiDAR scanning?
Measurement accuracy depends on the scanner, distance, surface characteristics, scanning methodology and point cloud registration.
Hamilton By Design reviews project accuracy requirements and selects an appropriate scanning approach based on the intended engineering application.
How long does an industrial scanning project take?
Project duration depends on the size and complexity of the site and the required deliverables.
Smaller projects may require one day of on-site scanning, followed by point cloud processing and any required engineering modelling.
Larger or more complex installations may require additional scanning and processing time.
What file formats can you provide?
Common deliverables include E57, RCP, RCS, LAS, STEP, Parasolid, SolidWorks models, PDF engineering drawings and other agreed formats.
Do you provide scanning services outside Chatswood?
Yes. Hamilton By Design provides industrial 3D LiDAR scanning and mechanical engineering services throughout Sydney, the Central Coast, Newcastle, the Hunter Valley and across Australia.
Request an Industrial 3D LiDAR Scanning Quotation in Chatswood
Planning an industrial equipment installation, mechanical services upgrade, structural modification, building refurbishment or pipework project in Chatswood?
Hamilton By Design can assist with accurate site measurement, 3D point cloud capture, mechanical engineering design and CAD documentation.
Our services support projects from initial site scanning through to the development of engineering models and fabrication drawings.
Contact Hamilton By Design to discuss your project requirements, required deliverables and proposed schedule.
Contact Us – Talk To Us
Our clients:
Hamilton By Design – Industrial 3D LiDAR Scanning, Mechanical Engineering and Scan-to-CAD Services in Chatswood, Sydney.