Construction activities such as piling, compaction, rock breaking, excavation and heavy vehicle movements can transmit ground vibration well beyond the worksite boundary.
Occupants commonly report rattling windows, shaking floors, or movement felt through walls and ceilings.
This understandably raises a serious concern:
Will this cause damage to my property — and if it does, how will it be proven?
In practice, many property damage disputes are not determined by what occupants experienced, but by what can be objectively demonstrated.
Without measurements taken during the works, it becomes extremely difficult to establish causation later.
Once the construction activity ceases, the opportunity to capture evidence is often permanently lost.
Why early measurement matters
Vibration is temporary. Structural cracking is permanent.
If vibration is not recorded while it is occurring, later assessments rely heavily on assumption rather than data. In the absence of measured information, the following questions become difficult to answer:
- Was vibration present at the property?
- How intense was it?
- How frequently did it occur?
- Was it within accepted engineering criteria?
- Could it reasonably have contributed to observed damage?
By contrast, monitoring performed during the works provides an independent record of actual site conditions at the time events occurred.
Perception vs structural risk
Human perception of vibration does not necessarily correlate with structural damage.
People can feel vibration levels well below those typically associated with building harm.
However, structural response depends on multiple variables:
- soil type and ground transmission characteristics
- distance to the works
- construction methodology and equipment energy
- building age and condition
- prior movement or existing cracking
- structural configuration and materials
Because of these factors, determining risk cannot be based on sensation alone.
It requires measurement and engineering interpretation.
Protecting your position
In many cases, concerns are only raised after visible cracking appears or after works have finished. At that stage, establishing responsibility becomes significantly more complex.
The practical question becomes:
If you do not document the conditions affecting your property while they are occurring — who will?
Contractors monitor works to manage their risk.
Property owners must also protect theirs.
Independent documentation obtained during construction provides a factual reference point for:
- communication with neighbours or builders
- engineering review
- insurance discussion
- legal or expert assessment if required
Hamilton By Design – independent vibration monitoring
Hamilton By Design provides independent vibration measurement and documentation for residential and commercial properties affected by nearby construction.
We travel across Australia to install monitoring equipment and record site conditions while works are underway.
Services may include:
- installation of calibrated vibration monitoring equipment
- event logging and trend review
- engineering-grade documentation
- guidance on next steps based on measured data
- optional crack mapping or 3D capture where appropriate
Act while the works are active
The reliability of any later assessment depends on evidence captured during the period of activity.
Monitoring after the machinery leaves site cannot reconstruct past conditions — it can only speculate about them.
If construction is occurring near your property and you are concerned about potential damage, early documentation is the most effective way to protect your position.
Contact Hamilton By Design
If your home is experiencing vibration from nearby building activity, contact Hamilton By Design to record site conditions before the construction stops.
Hamilton By Design Co.
Engineering • Measurement • Documentation
Australia-wide service