3D Scanning Engineering in Parks

3D Scanning in Parks NSW

Parks (Parkes), NSW is one of Australia’s most strategically important inland engineering centres. Known globally for the Parkes Radio Telescope and nationally for its role as a freight, rail, and agricultural hub, engineering in Parks is driven by precision, logistics, and reliability. Projects here often support large catchment areas, seasonal peak demand, and long-distance supply chains — which means there is little tolerance for rework or uncertainty.

Hamilton By Design supports Parks projects with engineering-led 3D LiDAR laser scanning, mechanical and structural engineering, 3D modelling, FEA, and easy-to-build fabrication drawings, helping clients move from site data to construction with confidence.

Engineering in Parks: Precision Meets Logistics

Engineering in Parks is shaped by several unique factors:

National-scale scientific and communications infrastructure
Inland rail, intermodal freight, and bulk logistics
Grain handling, storage, and agricultural processing
Emerging industrial development through the Special Activation Precinct

These environments demand engineering solutions that are accurate, robust, and practical, especially where assets operate continuously or are difficult to access once installed.

3D Laser Scanning for Parks Projects

Accurate 3D LiDAR laser scanning is the foundation of successful engineering in Parks.

Hamilton By Design captures high-resolution as-built data for:

Rail and logistics infrastructure
Grain silos, conveyors, and bulk-handling systems
Industrial buildings and plant
Existing assets with limited or outdated drawings

3D scanning records the true geometry of assets — including misalignment, deflection, settlement, and undocumented modifications. This is critical in Parks, where infrastructure is often upgraded in stages and must remain operational during works.

The result is fewer assumptions, fewer site visits, and reduced construction risk.

Learn more here:
3D Laser Scanning

3D Modelling from Real As-Built Conditions

From the point cloud, Hamilton By Design develops accurate 3D CAD models that reflect what is actually on site.

Our 3D modelling services support:

Brownfield upgrades and capacity increases
Clash detection around existing services and structures
Modular and transportable designs
Fabrication planning and installation sequencing
Long-term digital asset records

For Parks projects — where components are often fabricated offsite and installed under tight timeframes — modelling from real data significantly improves build confidence.

Explore our modelling capability:
3D CAD Modelling

FEA to Verify Performance and Reliability

Many assets in Parks operate under high cyclic loading, seasonal peaks, and demanding inland conditions. Finite Element Analysis (FEA) is used to confirm performance and guide upgrade decisions.

Hamilton By Design applies FEA to:

Verify structural capacity of existing assets
Assess fatigue, stress concentrations, and deflection
Check modifications to silos, frames, and handling systems
Support strengthening and life-extension strategies

By analysing as-built geometry, FEA results are more representative of real behaviour — critical for assets that must operate reliably during harvest and freight peaks.

Learn more about our analysis services:
FEA Capabilities

Easy-to-Build Fabrication and Installation Drawings

Clear, practical documentation is essential for regional projects where fabrication and installation teams rely on drawings to get the job done efficiently.

Hamilton By Design produces easy-to-build fabrication drawings, including:

General arrangement drawings
Fabrication and workshop details
Installation and lifting layouts
As-built documentation

Because drawings are developed directly from scanned data and validated 3D models, they align closely with site reality, reduce ambiguity, and minimise rework.

View our drafting services here:
Drafting Services

Why Hamilton By Design in Parks?

Hamilton By Design provides an integrated digital engineering workflow — from site capture through to modelling, analysis, and construction documentation.

For Parks clients, this means:

Fewer assumptions in complex logistics environments
Reduced risk during upgrades and expansions
Designs that suit inland conditions and heavy utilisation
Fabrication-ready drawings that support efficient construction

Whether you are upgrading grain infrastructure, expanding logistics facilities, or modifying existing industrial assets, Hamilton By Design delivers practical, build-ready engineering solutions tailored to the unique demands of Parks, NSW.

If you’re planning a project in Parks, we’re ready to help — starting with accurate data and carrying it through to construction-ready outcomes.

Our clients

Name

First

Last

Company / Organisation / Private Project

Your Role / Owner

Would you like us to arrange a phone consultation for you?

Phone

us Name Comment

Address

Address Line 1

Address Line 2

City

State / Province / Region

Postal Code

Country

Comment or Message

12 December 202512 January 2026

3D Scanning Engineering in Darwin

3D Scanning in Darwin

Darwin occupies a unique position within Australia’s engineering and infrastructure landscape. As the northern gateway to mining regions, offshore energy developments, defence infrastructure and remote industrial operations, engineering projects in Darwin demand robust design, accurate site data, and practical delivery methods suited to extreme environments.

Hamilton By Design provides 3D LiDAR laser scanning, mechanical and structural engineering, 3D CAD modelling, finite element analysis (FEA), and fabrication-ready drafting to support projects across Darwin and the broader Northern Territory. Our services are specifically suited to brownfield sites, remote facilities, tropical conditions and high-consequence industrial assets.

Engineering in Darwin – A Distinct Operating Environment

Engineering work in Darwin differs significantly from metropolitan centres due to a combination of factors:

Remote and FIFO-supported operations, servicing mining, energy and infrastructure projects across the NT and northern WA
Tropical climate exposure, including cyclones, corrosion, heat and humidity
Defence and marine infrastructure, with strict compliance and asset-integrity requirements
Aging brownfield assets, often modified over decades with limited as-built documentation
Limited shutdown windows, requiring accurate planning and first-time-right execution

These conditions place a premium on accurate as-built data, digital planning and engineering-led decision making before fabrication or construction begins.

3D LiDAR Laser Scanning for Darwin Projects

Accurate site data is the foundation of reliable engineering outcomes. Hamilton By Design uses high-resolution 3D LiDAR laser scanning to capture existing facilities, structures and terrain with millimetre-level accuracy.

3D scanning is particularly valuable in Darwin for:

brownfield plant upgrades and expansions
remote facilities where repeat site access is costly
marine and port infrastructure
defence and energy assets
FIFO-supported mining and processing facilities

Laser scanning eliminates guesswork by delivering a complete digital record of the site, including steelwork, pipework, conveyors, foundations, platforms and surrounding constraints.

Learn more about our scanning capability:
3D Laser Scanning

3D CAD Modelling – From Point Cloud to Digital Asset

Following scanning, Hamilton By Design converts point-cloud data into accurate 3D CAD models that represent true as-built conditions.

Our models are used to:

develop retrofit and upgrade designs
validate equipment fit-up and clearances
perform clash detection before fabrication
support construction planning and sequencing
create long-term digital asset records

This approach is especially valuable in Darwin’s industrial and remote environments, where errors can result in costly delays or rework.

Explore our modelling services:
3D CAD Modelling

Engineering Assessment & FEA for Harsh Conditions

Darwin projects frequently involve heavy loads, dynamic equipment, corrosion exposure and cyclone-rated structures. Hamilton By Design provides engineering assessment and finite element analysis (FEA) to verify performance, safety and compliance.

Our FEA capabilities support:

structural integrity assessments
equipment and support-frame design
fatigue and load-case evaluation
modification verification for existing assets
risk reduction prior to fabrication or installation

View our analysis capability:
FEA Capabilities

Drafting for Fabrication, Construction & Shutdown Works

Clear, accurate documentation is essential for FIFO workforces and remote fabrication. Hamilton By Design produces fabrication-ready drawings that are practical, buildable and aligned with site realities.

Deliverables include:

general arrangement (GA) drawings
detailed fabrication drawings
installation and modification layouts
isometrics and BOMs
as-built documentation

These drawings reduce ambiguity, improve construction efficiency and support safer execution in Darwin’s challenging conditions.

Learn more about our drafting services:
Drafting

Supporting FIFO Engineering & Remote Projects

Darwin plays a critical role as a FIFO engineering and logistics hub, supporting mining, energy and infrastructure projects across the Northern Territory and northern Australia. Hamilton By Design’s digital-first workflow enables:

reduced site visits through accurate upfront data capture
improved coordination between designers, fabricators and site crews
faster decision-making during shutdowns and maintenance windows
reliable documentation for remote execution

By combining scanning, modelling, engineering and drafting under one accountable provider, we help clients minimise risk and maximise certainty.

Engineering Confidence for Northern Australia

Hamilton By Design delivers practical, engineering-led digital solutions tailored to Darwin’s unique environment. Whether supporting FIFO-based mining operations, marine infrastructure, defence facilities or remote industrial assets, our services provide the clarity and confidence required to deliver complex projects successfully.

Our clients

Name

First

Last

Company / Organisation / Private Project

Your Role / Owner

Would you like us to arrange a phone consultation for you?

Phone

Address

Address Line 1

Address Line 2

City

State / Province / Region

Postal Code

Country

Address Role /

Comment or Message

12 December 202512 January 2026

3D Scanning Engineering in Port Lincoln

3D Scanning in Port Lincoln

Port Lincoln is unlike any other regional centre in South Australia. Known as Australia’s seafood capital, it combines a working commercial harbour, marine-based industries, food processing, and export infrastructure within a tight coastal footprint. Engineering here must perform reliably in a marine environment, meet strict hygiene and biosecurity requirements, and minimise downtime in export-critical operations.

Hamilton By Design supports Port Lincoln projects with engineering-led 3D LiDAR laser scanning, 3D modelling, FEA, and easy-to-build fabrication drawings, helping clients upgrade, modify, and maintain assets with confidence.

Engineering in Port Lincoln: Marine, Food-Grade, and Export Driven

Engineering in Port Lincoln is shaped by a unique mix of conditions:

Saltwater corrosion and harsh coastal exposure
Continuous operations tied to fishing, aquaculture, and exports
Tight brownfield sites around wharves and processing facilities
High compliance expectations for hygiene, drainage, and separation

In this environment, assumptions are risky. Accurate as-built data and practical engineering solutions are essential to avoid rework, contamination risks, and unplanned downtime.

3D Laser Scanning for Port Lincoln Facilities

3D LiDAR laser scanning provides the foundation for successful engineering projects in Port Lincoln.

Hamilton By Design captures accurate as-built conditions of:

Seafood processing plants and cold-storage facilities
Port infrastructure, wharves, and marine interfaces
Conveyors, platforms, pipework, and structural steel
Buildings and plant within space-constrained coastal sites

Scanning records the true geometry of existing assets — including misalignment, corrosion loss, undocumented modifications, and tight clearances — all common in marine and food-processing environments.

This enables:

Reduced site visits
Safer design development
Fewer clashes during installation
Confident planning around live operations

Learn more about our scanning services:
3D Laser Scanning

3D Modelling Based on Real As-Built Data

From the point cloud, Hamilton By Design develops accurate 3D CAD models that reflect what is actually on site — not what legacy drawings suggest.

Our 3D modelling services support:

Brownfield upgrades and plant modifications
Space-constrained layout changes
Clash detection around existing services
Fabrication planning and modular construction
Digital asset documentation

In Port Lincoln, where sites are tight and shutdown windows are limited, modelling from real data significantly reduces construction risk.

Explore our modelling capability:
3D CAD Modelling

FEA for Marine and Industrial Assets

Many Port Lincoln assets operate in corrosive, cyclic loading environments and must continue performing safely over long service lives. Finite Element Analysis (FEA) is used to verify performance and guide decision-making.

Hamilton By Design applies FEA to:

Assess structural capacity and fatigue
Check modifications to existing steelwork
Evaluate deflection, buckling, and load paths
Support life-extension and strengthening strategies

By analysing as-built geometry, FEA results are more representative of real behaviour — especially important in marine and port environments.

Learn more here:
FEA Capabilities

Easy-to-Build Fabrication and Installation Drawings

Clear, practical documentation is critical for Port Lincoln projects, where fabrication and installation often occur under time pressure and around live operations.

Hamilton By Design delivers easy-to-build fabrication drawings, including:

General arrangement drawings
Fabrication and workshop details
Installation and lifting layouts
As-built documentation

Because drawings are generated directly from scanned data and validated 3D models, they align with site reality, reduce ambiguity, and support efficient construction.

View our drafting services:
Drafting Services

Why Hamilton By Design in Port Lincoln?

Hamilton By Design offers an integrated digital engineering workflow — from site capture through to modelling, analysis, and construction documentation.

For Port Lincoln clients, this means:

Fewer assumptions in marine and food-grade environments
Reduced risk in tight, brownfield sites
Designs that consider corrosion, hygiene, and constructability
Fabrication-ready drawings that support reliable installation

Whether you’re upgrading seafood processing facilities, modifying port infrastructure, or maintaining marine-exposed assets, Hamilton By Design provides practical, engineering-led 3D scanning and digital engineering solutions tailored to Port Lincoln’s unique conditions.

If you’re planning a project in Port Lincoln, we’re ready to help — starting with accurate data and carrying it through to buildable outcomes.

Our Services

Name

First

Last

Company / Organisation / Private Project

Your Role / Owner

Would you like us to arrange a phone consultation for you?

Phone

Address

Address Line 1

Address Line 2

City

State / Province / Region

Postal Code

Country

to Email Organisation

Comment or Message

12 December 202512 January 2026

3D Scanning Engineering in Port Augusta

3D Scanning in Port Augusta

Port Augusta is one of South Australia’s most strategically important engineering centres. Sitting at the crossroads of national road and rail networks, and at the gateway to the outback, it supports projects that stretch far beyond the city itself — from energy infrastructure and utilities to mining, transport, and heavy industry.

Engineering in Port Augusta is shaped by distance, scale, and reliability. Projects often serve remote locations, operate in harsh environments, and leave little room for rework once construction begins. That makes accurate site data, practical engineering, and buildable documentation essential.

Hamilton By Design supports Port Augusta projects with 3D LiDAR laser scanning, mechanical and structural engineering, 3D modelling, FEA, and fabrication-ready drafting, providing a clear digital pathway from site capture to construction.

Engineering in Port Augusta: Built for Distance and Infrastructure

Unlike plant-centric industrial cities, Port Augusta engineering is infrastructure-led. Work here often involves:

Power generation, transmission, and energy transition assets
Rail, road, and logistics infrastructure
Water, pipeline, and utility systems
Facilities that support remote and regional projects

These environments demand engineering solutions that are robust, conservative, and well verified, particularly when access is limited and installation conditions are challenging.

Hamilton By Design’s workflow is designed to reduce uncertainty before fabrication and construction begin.

3D Laser Scanning for Port Augusta Projects

Accurate 3D LiDAR laser scanning is the foundation of successful engineering in Port Augusta.

We capture high-resolution, engineering-grade scans of:

Existing infrastructure and industrial facilities
Power and utility assets
Rail-adjacent structures and corridors
Buildings, platforms, and access systems

3D scanning records the true as-built condition of assets — including misalignment, deflection, settlement, and undocumented modifications. This is critical in Port Augusta, where legacy infrastructure often predates modern digital records.

Our scan data helps to:

Reduce site visits to remote locations
Eliminate fit-up surprises during installation
Improve safety and shutdown planning
Support confident design decisions

Learn more about our scanning services here:
3D Laser Scanning

3D Modelling from Real As-Built Conditions

Once scanning is complete, Hamilton By Design converts point cloud data into accurate 3D CAD models that reflect site reality.

Our 3D modelling services support:

Infrastructure upgrades and extensions
Brownfield modifications
Clash detection and constructability reviews
Modular and transportable designs
Digital asset records

For Port Augusta projects — where components may be fabricated offsite and installed remotely — accurate modelling significantly reduces risk and improves build confidence.

Explore our modelling capability:
3D CAD Modelling

FEA to Verify Performance and Extend Asset Life

Many Port Augusta projects involve existing assets that must continue operating under new loads, standards, or operating conditions. Finite Element Analysis (FEA) allows these decisions to be made with confidence.

Hamilton By Design applies FEA to:

Verify structural capacity
Assess fatigue and stress concentrations
Check deflection, buckling, and thermal effects
Support strengthening or life-extension strategies

By basing analysis on as-built geometry, FEA results are more representative of real behaviour — especially important for infrastructure exposed to heat, dust, and long service lives.

Learn more about our analysis services:
FEA Capabilities

Easy-to-Build Fabrication and Installation Drawings

Clear, practical documentation is critical for Port Augusta projects, particularly where fabrication and installation teams may be working remotely or under tight schedules.

Hamilton By Design produces easy-to-build fabrication drawings, including:

General arrangement drawings
Fabrication and workshop details
Installation and lifting layouts
As-built documentation

Because drawings are developed directly from scanned data and validated 3D models, they are aligned with site conditions and fabrication realities — reducing ambiguity and minimising construction delays.

View our drafting services here:
Drafting Services

Why Hamilton By Design for Port Augusta Engineering?

Hamilton By Design offers a single, integrated workflow — from site capture through to engineering, analysis, and construction documentation.

For Port Augusta clients, this means:

Better decisions earlier in the project
Fewer assumptions and fewer site surprises
Designs that suit remote and infrastructure-driven environments
Fabrication-ready outputs that support efficient construction

Whether you are upgrading existing infrastructure, supporting energy transition projects, or delivering assets for remote locations, Hamilton By Design provides engineering-led 3D scanning and digital engineering solutions tailored to Port Augusta’s unique demands.

If you’re planning a project in or around Port Augusta, we’re ready to help — starting with accurate data and carrying it through to buildable outcomes.

Our Clients

Name

First

Last

Company / Organisation / Private Project

Your Role / Owner

Owner to or

Would you like us to arrange a phone consultation for you?

Phone

Address

Address Line 1

Address Line 2

City

State / Province / Region

Postal Code

Country

Comment or Message

12 December 202512 January 2026

3D Scanning Engineering in Whyalla

3D Scanning in Whyalla

Whyalla is one of South Australia’s most engineering-driven regional cities. Built around steelmaking, port infrastructure, and heavy industry, it is a place where engineering is practical, site-focused, and shaped by decades of brownfield assets, modifications, and operational realities.

For engineers working in Whyalla, accuracy matters. Many assets have been upgraded, repaired, or adapted multiple times over their life, often with incomplete or outdated drawings. This is where engineering-led 3D LiDAR scanning and digital modelling become essential tools — not just nice-to-have technology.

Hamilton By Design supports Whyalla’s industrial, mining, port, and infrastructure sectors with 3D laser scanning, mechanical engineering, 3D modelling, FEA, and drafting, delivering data and designs that work in the real world.

Engineering Challenges Unique to Whyalla

Engineering in Whyalla is rarely greenfield. Most projects involve:

Existing steel structures and mechanical plant
Live operating environments
Marine corrosion and harsh conditions
Tight shutdown windows
Limited tolerance for rework

Successful projects depend on accurate as-built information, practical engineering judgement, and designs that can be fabricated and installed locally.

Hamilton By Design brings these elements together in a single workflow.

3D Laser Scanning for Whyalla Projects

High-accuracy 3D LiDAR laser scanning forms the foundation of our work in Whyalla.

Using engineering-grade scanners, we capture true as-built conditions of:

Steelworks and heavy industrial plant
Conveyors, chutes, and mechanical equipment
Port structures, wharves, and ship-loader interfaces
Buildings, platforms, and access structures

Unlike traditional surveys, 3D scanning records real geometry, including misalignment, deflection, corrosion loss, and historic modifications.

This data is used to:

Eliminate site rework
Reduce shutdown risk
Validate fit-ups before fabrication
Support safe and efficient upgrades

Learn more about our approach to
3D Laser Scanning

3D Modelling Built from Real As-Built Data

Once scanning is complete, the point cloud becomes the basis for accurate 3D CAD models.

Hamilton By Design produces SolidWorks-based models that reflect what is actually on site — not what old drawings suggest should be there.

Our 3D modelling services support:

Brownfield mechanical upgrades
Structural modifications
Clash detection and spatial checks
Fabrication-ready designs
Asset documentation and digital twins

For Whyalla projects, this approach significantly reduces risk, especially where legacy assets and tight clearances are involved.

Explore our modelling capability here:
3D CAD Modelling

FEA for Heavy Industry and Steel Assets

Whyalla engineering often involves ageing assets that must continue operating safely under modern standards. This is where Finite Element Analysis (FEA) plays a critical role.

Hamilton By Design uses FEA to assess:

Structural capacity of existing steelwork
Fatigue and stress concentrations
Load changes from modifications or upgrades
Deflection, buckling, and thermal effects

FEA allows informed decisions about:

Strengthening versus replacement
Extending asset life
Verifying compliance with current requirements

All analysis is grounded in real as-built geometry, improving confidence in results and recommendations.

Learn more about our analysis services:
FEA Capabilities

Engineering Drafting That Supports Construction

Clear, accurate documentation is critical for fabrication and installation in Whyalla’s industrial environment.

Hamilton By Design delivers engineering-ready drafting, including:

General arrangement drawings
Fabrication and workshop drawings
Installation and modification layouts
As-built documentation

Drafting is produced directly from scanned data and validated 3D models, ensuring drawings align with site reality.

View our drafting services here:
Drafting Services

Why Hamilton By Design in Whyalla?

What sets Hamilton By Design apart is engineer-led scanning and modelling. We don’t treat scanning as a standalone survey — it is integrated directly into engineering, analysis, and drafting workflows.

For Whyalla clients, this means:

Fewer assumptions
Less rework
Better shutdown outcomes
Designs that fit and function first time

From steelworks and port infrastructure to industrial plant and buildings, Hamilton By Design supports Whyalla projects with practical, accurate, and construction-focused digital engineering.

If you’re planning an upgrade, modification, or assessment in Whyalla, we’re ready to help — starting with the right data and carrying it through to fabrication-ready outcomes.

Our Clients

Name

First

Last

Company / Organisation / Private Project

Your Role / Owner

Would you like us to arrange a phone consultation for you?

Phone

like Your Name

Address

Address Line 1

Address Line 2

City

State / Province / Region

Postal Code

Country

Comment or Message

11 December 202512 January 2026

3D Scanning Engineering in Geraldton

Delivering Accuracy, Efficiency & Engineering Certainty for WA’s Mid-West Industries

Geraldton is one of Western Australia’s most strategically important regional centres — a city where port operations, grain and mineral export infrastructure, heavy-industry fabrication, fishing, renewables, and large-scale construction all intersect. With its combination of coastal exposure, industrial logistics and expanding regional infrastructure, Geraldton demands a high level of engineering precision.

Hamilton By Design supports Geraldton businesses and project teams with an integrated workflow of 3D LiDAR laser scanning, 3D CAD modelling, mechanical & structural engineering, and fabrication-ready drafting. For brownfield upgrades, shutdowns, port expansions, industrial maintenance or new plant installations, our engineer-led scanning and modelling process removes guesswork and delivers millimetre-accurate confidence.

Why Geraldton Is Unique — and Why Precision Matters Here

Geraldton’s industrial environment brings a mix of coastal, agricultural, mining-supply and port-driven challenges:

A major deep-water port exporting grain, mineral sands, iron ore and project cargo.
Salt, wind and marine exposure, creating elevated corrosion risk and structural degradation over time.
Rapid industrial expansion, including renewables, hydrogen developments and logistics infrastructure.
Heavy agricultural processing and storage facilities requiring accurate as-built documentation.
Fabrication workshops and marine-repair industries that depend on precise measurements for fit-ups and installations.

This combination makes high-accuracy digital engineering essential for safe planning, fabrication, installation and long-term maintenance.

3D LiDAR Laser Scanning — The Foundation of Reliable Engineering in Geraldton

Hamilton By Design uses engineering-grade LiDAR scanning to capture highly accurate as-built conditions for industrial assets, port infrastructure, conveyor systems, structural steel, storage facilities, platforms, marine installations and complex brownfield environments.

Our scans deliver:

Millimetre-accurate digital geometry
Complete capture of steelwork, conveyors, chutes, tanks, pipework and machinery layouts
Safer data collection with minimal site intrusion
Faster planning for shutdowns, retrofits and upgrades
Confidence that fabrication will fit the first time

Learn more about our scanning services here:
3D Laser Scanning

For Geraldton’s industrial clients, accurate scanning reduces rework, speeds up fabrication, and provides a digital asset model that supports efficient maintenance.

3D CAD Modelling — Turning Reality Into Reliable Engineering Data

Once scanned, your site is modelled into intelligent, workable 3D CAD assemblies. This provides a digital foundation for engineering, fabrication and installation.

Our modelling services include:

Mechanical & structural 3D assemblies
Conveyor, chute, tank, pump, and pipeline models
General arrangement (GA) drawings
Fabrication drawings, isometrics and BOMs
Clash detection & layout optimisation
Brownfield upgrade planning

Geraldton industries — from port operations to fabrication yards — benefit significantly from models that depict true as-built conditions, not assumptions.

Explore our modelling capabilities here:
3D CAD Modelling

Engineering & FEA — Built for Coastal, Industrial & High-Load Environments

Geraldton’s industrial landscape involves high wind loads, marine influence, heavy equipment and load-bearing structures. Hamilton By Design provides engineering services tailored to these realities.

Our engineering support includes:

Mechanical design & optimisation
Structural assessments & remediation design
Conveyor, chute & materials-handling engineering
Equipment layout & access improvements
Pressure vessel & tank evaluations
FEA stress, fatigue, modal & thermal assessments

See our FEA capabilities here:
FEA Capabilities

Drafting Services — Clear, Build-Ready Documentation

Fabrication-ready documentation ensures your project can move from design to manufacture seamlessly.

Our drafting services include:

Detailed workshop drawings
Isometric piping & mechanical drawings
Structural detailing
Marked-up modification drawings
As-built drawing creation and revision

Explore drafting services here:
Drafting Services

With Geraldton’s strong fabrication and engineering-support sector, having accurate, clean and consistent drawings is critical for productivity and installation success.

How Geraldton Projects Benefit From Hamilton By Design

Whether you’re upgrading port conveyors, modifying grain-handling infrastructure, refurbishing marine-exposed structures, or installing new process equipment, our end-to-end workflow provides:

One source of truth from scan → model → engineering → drafting
Reduced shutdown time
Minimal rework due to clash-free, accurate designs
Improved safety with less manual measurement in hazardous areas
Faster fabrication through precise digital inputs

From Beresford to Narngulu to the Geraldton Port precinct, our engineering team supports projects of all scales with industry-leading accuracy and speed.